Additional information
Weight | 8 oz |
---|---|
Dimensions | 4 × 4 × 6 in |
Building Instructions Build an incredible 3D LED light display. The Lux Cube is a 4x4x4 LED light cube with a printed custom circuit board that makes assembly simple. Difficulty: Beginner - Intermediate Time Required: 3-4 hours Knowledge Required: Basic electronics and soldering skills. Tools Required: Soldering iron Solder Wire strippers Wire cutters Needle nose pliers 3rd hand Eye protection Components: 3D printed placeholder (1) 5mm LEDs (68) Printed circuit board (1) Resistors 220 ohm (17) Resistor 10K ohm (1) Header pins, connected (7) Terminal (1) Transistor BC338 (4) MCU PIC16F886 Capacitor 0.47uF (1) Capacitor 22uF (1) Switch 1P2T (1) Regulator LM2940 (1) Battery pack series 4AA (1) PCB rubber feet (4) Ribbon cable (1) Single conductor wire (4)" /> Building Instructions Build an incredible 3D LED light display. The Lux Cube is a 4x4x4 LED light cube with a printed custom circuit board that makes assembly simple. Difficulty: Beginner - Intermediate Time Required: 3-4 hours Knowledge Required: Basic electronics and soldering skills. Tools Required: Soldering iron Solder Wire strippers Wire cutters Needle nose pliers 3rd hand Eye protection Components: 3D printed placeholder (1) 5mm LEDs (68) Printed circuit board (1) Resistors 220 ohm (17) Resistor 10K ohm (1) Header pins, connected (7) Terminal (1) Transistor BC338 (4) MCU PIC16F886 Capacitor 0.47uF (1) Capacitor 22uF (1) Switch 1P2T (1) Regulator LM2940 (1) Battery pack series 4AA (1) PCB rubber feet (4) Ribbon cable (1) Single conductor wire (4)" />
$65.00
The Lux is a 4x4x4 LED light cube with a printed custom circuit board that makes assembly simple.
Build an incredible 3D LED light display. The Lux Cube is a 4x4x4 LED light cube with a printed custom circuit board that makes assembly simple.
Difficulty: Beginner – Intermediate
Time Required: 3-4 hours
Knowledge Required: Basic electronics and soldering skills.
Tools Required:
Soldering iron
Solder
Wire strippers
Wire cutters
Needle nose pliers
3rd hand
Eye protection
Components:
3D printed placeholder (1)
5mm LEDs (68)
Printed circuit board (1)
Resistors 220 ohm (17)
Resistor 10K ohm (1)
Header pins, connected (7)
Terminal (1)
Transistor BC338 (4)
MCU PIC16F886
Capacitor 0.47uF (1)
Capacitor 22uF (1)
Switch 1P2T (1)
Regulator LM2940 (1)
Battery pack series 4AA (1)
PCB rubber feet (4)
Ribbon cable (1)
Single conductor wire (4)
20 in stock
Reviews
There are no reviews yet.